Agilent Technologies 35670A Manual page 389

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

MMEMory:LOAD:MATH

Loads a complete set of math definitions into the analyzer from the specified disk.

Command Syntax:

<FILENAME> ::= '[<PATH>]<filename>'

<PATH> ::= <MSIS>[{DOS_DIR}]

<MSIS> ::= RAM:|NVRAM:|INT:|

<DOS_DIR> ::= \<DIR_NAME>\

<DIR_NAME> ::= ASCII characters

<filename> ::= ASCII characters (see beginning of chapter

Example Statements:

Attribute Summary:

Description:

This command loads the contents of a file into the analyzer's function registers (F1 through F5) with math

functions and the analyzer's constant registers (K1 through K5) with values. The file must have been

saved with the MMEM:STOR:MATH command.

MMEMory:LOAD:MATH <FILENAME>

EXT[,<select_code>[,<unit _number>]]:

for <filename> restrictions)

OUTPUT 711;"MMEM:LOAD:MATH 'EXT:MATHF1'"

OUTPUT 711;"mmemory:load:math 'mymath'"

not applicable

Synchronization Required:

Preset State:

not applicable

SCPI Compliance:

instrument-specific