Agilent Technologies 35670A Manual page 171

CALCulate[1|2|3|4]:MARKer:DTABle:X:INSert
Inserts an entry into the data table.
Command Syntax:
<number> ::= a real number (NRf data)
<unit> ::= [HZ|S|ORD|COUNT|AVG|V|VPK|RPM|EU|REV]
<bound> ::= MAX|MIN
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
If you want to insert entries in a specific order or if you are modifying an existing data table, use the
CALC:MARKER:DTAB:X:SELECT[:POINT] command. The X value is inserted before the
selected entry.
CALCulate[1|2|3|4] specifies the data table. Send CALC1 to specify the data table appearing in trace box
A, CALC2 to specify B, CALC3 to specify C, and CALC4 to specify D. If you do not send the optional
specifier, the command defaults to the data table appearing in trace box A.
To display the data table, use the DISPlay[:WINDow[1|2|3|4]]:DTABle[:STATe] command.
CALCulate[1|2|3|4]:MARKer:DTABle:X:INSert {<number>
[<unit>]}|<bound>
limits: -9.9e37:9.9e37
OUTPUT 711;":CALC3:MARK:DTABLE:X:INSERT 2.0516e+37"
OUTPUT 711;"calc:mark:dtable:x:insert 6.26239e+36"
CALCulate[1|2|3|4]:MARKer:DTABle:X:INSert?
Real
Option: not applicable
Synchronization Required:
Preset State: not applicable
SCPI Compliance:
no
instrument-specific
CALCulate
command/query
6-63