Agilent Technologies 35670A Manual page 593

SYSTem:COMMunicate:SERial[:RECeive]:PARity[:TYPE]
Sets the parity generated for characters transmitted over the RS-232-C interface.
Command Syntax:
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
Send SYST:COMM:SERIAL:PARITY ODD, if you want ODD parity.
Send SYST:COMM:SERIAL:PARITY EVEN, if you want EVEN parity.
Send SYST:COMM:SERIAL:PARITY NONE, if a parity bit is not to be
included.
To turn on parity verification, send the SYSTem:COMMunicate:SERial:RECeive:PARity:CHECk ON
command.
SYSTem:COMMunicate:SERial[:RECeive]:PARity[:TYPE]
NONE|EVEN|ODD
OUTPUT 711;"SYST:COMM:SER:PAR ODD"
OUTPUT 711;"syst:communicate:serial:receive:parity none"
SYSTem:COMMunicate:SERial[:RECeive]:PARity[:TYPE]?
NONE|EVEN|ODD
Option: not applicable
Synchronization Required:
Preset State: not affected by Preset
SCPI Compliance:
no
confirmed
SYSTem
command/query
21-9