Agilent Technologies 35670A Manual page 193

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

CALCulate[1|2|3|4]:MARKer:REFerence:Y

Specifies the marker reference Y-axis position.

Command Syntax:

<number> ::= a real number (NRf data)

<unit> ::= [DBVRMS|VPK|DBVPK|V|DBV|EU|DBEU|VRMS]

<step> ::= UP|DOWN

<bound> ::= MAX|MIN

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

This command specifies the absolute Y-axis position for the reference marker.

To specify the marker reference Y-axis position relative to the main marker's position, use the

CALC:MARK:Y:REL command.

CALCulate[1|2|3|4]:MARKer:REFerence:Y {<number>[<unit>]}|

-9.9e37:9.9e37

OUTPUT 711;"calculate4:mark:ref:y 7.47833e+37"

OUTPUT 711;"Calc2:Marker:Ref:Y -8.7245e+37"

CALCulate[1|2|3|4]:MARKer:REFerence:Y?

not applicable

Synchronization Required:

Preset State:

SCPI Compliance:

instrument-specific

command/query