Calculate[1|2|3|4]:Waterfall:trace:copycommand - Agilent Technologies 35670A Manual

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

Description:

This command loads all segments of a limit. Each segment must consist of a start value

(start_X-axis_value, start_Y-axis_value) and a stop value (stop_X-axis_value, stop_Y-axis_value).

The analyzer does not clear the previous lower limit definition when you send new segments. It only

overwrites those portions of the limit redefined by the new segments. Send CALC:LIM:LOW:CLE to

clear the previous limit.