Agilent Technologies 35670A Manual page 68

Command Syntax in the Agilent 35670A
ACORR[1|2|3|4] Autocorrelation (INST:SEL CORR only)
XCORR[21|31|41|43] Cross Correlation (INST:SEL CORR only)
CPOW[1|2|3|4] Composite Power (INST:SEL ORD only; Option 1D0)
TRACK[1|2|3|4|5] (INST:SEL ORD only; Option 1D0)
[1|2|3|4|5] specifies order track
TIME[1|2|3|4] Resampled Time (INST:SEL ORD only; Option 1D0)
RPM RPM Profile (INST:SEL ORD only; Option 1D0)
NVAR[1|2|3|4] Normalized Variance (INST:SEL SINE only; Option 1D2)
<FILE>
This string is used to describe the name of a file. It does not include any disk drive information.
The valid character set for <FILE> depends on the disk format.
DOS file names are limited to 8 ASCII characters followed by a period and a 3 ASCII character extension.
The period and extension are not required. File names are not case sensitive.
LIF file names are limited to 10 ASCII characters which may include all characters except ":" "<" and "|".
The first character must be a letter. File names are case sensitive.
<FILENAME>
This string is used to describe the name of a file on the default disk, on the specified disk, or the specified disk
and DOS directory. The allowed form is:
"[PATH]filename"
where PATH must be replaced with:
"[MSIS:][\DOS_DIR\]"
where MSIS: must be replaced with:
RAM: which selects the volatile RAM disk.
NVRAM: which selects the non-volatile RAM disk.
INT: which selects the internal disk drive.
EXT[,<select_code>[,<unit_number>]]: which selects an external disk drive.
The brackets are not literal in the parameter. They indicate that the disk drive designation is optional. If the
disk drive is not specified, the default disk drive is used. Select the default specifier with the MMEM:MSIS
command.
DOS_DIR specifies a directory name (DOS only). DOS directory names are limited to ASCII characters. The
forward slash (/) may be used as a directory separator instead of the backward slash (\).
The brackets are not literal in the parameter. They indicate that the directory designation is optional. If the
director is not specified, the default directory is used. Select the default specifier with the MMEM:MSIS
command.
The valid character set for <FILENAME> depends on the disk format.
DOS file names are limited to 8 ASCII characters followed by a period and a 3 ASCII character extension.
The period and extension are not required. File names are not case sensitive.
2-10