Agilent Technologies 35670A Manual page 339

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

HCOPy:TITLe[1|2]

Specifies a label for plot and print output.abeling;plot/print

Command Syntax:

<STRING> ::= maximum of 59 ASCII characters

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

This command specifies a label for your plot or print output. The label appears at the top of the screen.

The two lines. See figure 10-3. The label is plotted (or printed) when HCOP:ITEM:LAB:STAT is ON

and the HCOP:IMM command is executed.

The label specifier determines whether you are specifying text for the first or the second line. Omit the

specifier or send 1 for the first line of the label and 2 for the second line of the label.

Specify a label with a space to have the area appear blank on the plot (the mini-state will not appear).

If you need to use a command that complies with SCPI, see the HCOP:ITEM:LABel:TEXT command.

HCOPy:TITLE[1|2|3|4] '<STRING>'

OUTPUT 711;":hcopy:titl:lab:text 'Test 1 Results'

OUTPUT 711;"HCOP:TITLE:TEXT2 'BEARING CHARACTERISTICS'

HCOPy:TITLe[1|2]?

not applicable

Synchronization Required:

Preset State:

not applicable

SCPI Compliance:

Figure 10-3. Plot/Print Title and Time Stamp

instrument-specific

Title line 1

Title line 2

command/query