Agilent Technologies 35670A Manual page 423

17
PROGram
The commands in this subsystem are only available when the Instrument BASIC option is installed
(Option 1C2). The commands in the PROGram subsystem allow you to generate and control Instrument
BASIC programs in the analyzer.
The commands grouped under the SELected mnemonic operate on the active program buffer. Since
SELected is an implied mnemonic, you can omit it from the PROGram commands. See "Implied
Mnemonics" in chapter 2 of the GPIB Programmer's Guide for more information.
The command under the EXPLicit mnemonic operates on any one of the analyzer's five program
buffers—not just the active program buffer.
17-1