Atm-Intf (Tn2305/6) - Avaya DEFINITY Server CSI Maintenance Manual

Maintenance Objects

ATM-INTF (TN2305/6)

MO Name (in Alarm Log)
ATM-INTF
The TN2305/6 is recognized by the system as an ATM Interface board
(ATM-INTF) if it has not been assigned a personality through the add atm-pnc
command or add atm trunk command. ATM-INTF does not have a maintenance
strategy associated with it, although the Control Channel test can be run on
demand by using the test board command, and the board can be reset by using
the reset board command. The board is visible through the list config and
change circuit-pack commands.
The circuit packs listed in
serve the ATM Port Network Connectivity (ATM-PNC).
Table 79. ATM-EI circuit packs for ATM-PNC
Circuit pack
TN2305
TN2306
NOTE:
Always replace an ATM-EI circuit pack with the same type.
744
Issue 5 October 2002
Alarm Level Initial Command to Run
WARNING test board UUCSSpp
Table 79 are ATM-EI boards if they are administered to
Fiber
Multi mode
Single mode
Full Name of MO
ATM interface board
Echo cancellation Release
Y
Y
7.1
7.1
555-233-119