Avaya DEFINITY Server CSI Maintenance Manual page 742

Maintenance Objects
Hardware Error Log Entries and Test to Clear
Values
Table 76. ATM D-channel Error Log entries
Error Aux
Type Data Associated Test
0 (a) 0 Any
18 (b) 0 busyout port UUCSSpp
130 (c) None
1793 Signaling Link Board
(d) Check (#643)
1. pp is for ports 9-32.
Notes:
a. Run the Short Test Sequence first. If all tests pass, run the Long Test
Sequence. Refer to the appropriate test description and follow the
recommended procedures.
b. Error Type 18: D-channel busied out; no calls possible over this D-channel.
c. Error Type 130: circuit pack removed or has been insane for more than 11
minutes. To clear the error, reinsert or replace the circuit pack.
d. Error Type 1793: ATM Trunk circuit pack failed the Signaling Link Board
Check (#643). Resolve any ATM-TRK errors in the Error Log.
System Technician-Demanded Tests:
Descriptions and Error Codes
The command to test the ATM-DCH maintenance object is test port UUCSSpp,
where pp is for ports 9-32.
Table 77. System Technician-Demanded Tests: ATM-DCH
Order of Investigation
Signaling Link Board Check (#643)
D = Destructive, ND = Nondestructive
1.
742
Issue 5 October 2002
Alarm On/Off
Level Board
Any Any
WARNING OFF
WARNING ON
Short Test Long Test
Sequence Sequence
X X
Test to Clear Value
1
test port UUCSSpp
release port UUCSSpp
test port UUCSSpp
test board UUCSS l
Continued on next page
D/ND1
ND
555-233-119