Avaya DEFINITY Server CSI Maintenance Manual page 757

Table of Contents

Advertisement

ATM-SGRP (ATM Signaling Group)
Table 86. TEST #1291 Remote Layer 3 Query — Continued
Error
Test
Code
Result
2100
ABORT
Could not allocate the necessary system resources to run this test.
2500
ABORT
Internal system error or administration problem
or
none
FAIL
Internal system error
PASS
A message was sent to the far-end switch or terminal adapter. The ISDN PRI
specification allows up to 2 minutes for a reply.
555-233-119
Description/Recommendation
1. Retry the command at 1-minute intervals a maximum of 5 times.
1. Determine if any B-channels are administered.
2. If there are none, this is a normal ABORT since this test cannot run
unless at least one B-channel is administered.
3. If at least one B-channels is administered, there is an internal system
error. Retry the command at 1-minute intervals a maximum of 5 times.
1. See description of ABORT with Error Code 2500.
1. Check the Error Log for ATM-SGRP errors of type 2305 for evidence of a
Remote Layer 3 Query failure.
2. If no new errors were logged since this test was run, this switch and the
far-end switch can exchange call control messages.
3. If there is still a problem with a particular ATM trunk, busyout the trunk
and run the long test sequence, paying particular attention to the results
of Test #258 (ISDN Test Call).
Continued on next page
Issue 5 October 2002
757

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents