Super Frame Match Inquiry Test - Avaya DEFINITY Server CSI Maintenance Manual

Maintenance Objects
The Announcement circuit pack lock-up can be cleared remotely by
performing a soft reset to the circuit pack:

Super Frame Match Inquiry Test (#211)

The super frame is a means by which the SP synchronizes with the 140AY device
on the Announcement circuit pack. If the super frame is not synchronized, the SP
is not able to properly process record/playback requests. Both the SP and the
hardware generate a super frame pulse. When these two pulses are out of synch,
the SP sets a flag to indicate the mismatch. When this test is run, the state of this
flag is returned.
Table 61. TEST #211 Super Frame Match Inquiry
Error Test
Code Result
2000 ABORT
2100 ABORT
ABORT
FAIL
PASS
710
Issue 5 October 2002
busyout board PCSS (this command drops all calls in progress on
the Announcement circuit pack)
reset circuit pack using the reset board PCSS command
release circuit pack using the release board PCSS command
Description/ Recommendation
Response to the test request was not received within the allowable time
period. If Error Type 1538 is present in the Error Log, follow the
maintenance strategy recommended for this Error Type.
Could not allocate the necessary system resources to run this test.
Internal system error.
1. Retry the command at 1-minute intervals a maximum of 5 times.
Test failed. Announcement playbacks should sound corrupted.
1. Reset the circuit pack with reset board PCSS and run this test again. If
the test continues to fail, replace the circuit pack (see Warning).
2. If there are recurring alarms on this circuit pack caused by this test
failing, replace the circuit pack even if Step 1 works (see Warning).
!
WARNING:
Replacing the circuit pack results in loss of integrated
announcements. See
Maintenance procedure.
The SP can properly process record/playback requests. User-reported
troubles on this circuit pack should be investigated using other circuit pack
and port tests. Refer to ''ANN-PT (Announcement Port)''
documentation for a description of the port tests.
''General Notes''near the beginning of this
Continued on next page
Maintenance
555-233-119