Avaya DEFINITY Server CSI Maintenance Manual page 735

ATM-BCH (ATM B-Channel Trunk)
Table 73. TEST #256 Service State Audit Test
Error Test
Code Result
1000 ABORT Needed resources not available, port on a call or initializing
1018 ABORT Maintenance disabled
1113 ABORT Signaling link failed
1114 ABORT Signaling link in transitional state
1116 ABORT Trunk not in Out-of-Service/Far-end state and country protocol other than 1
1117 ABORT Service-state audit message outstanding
2100 ABORT Could not allocate needed resources
1113 FAIL Signaling link failed
FAIL Internal system error
PASS
555-233-119
Description/Recommendation
1. Run status trunk grp#/mbr#.
1. Check the results of Test #255.
1. Enable maintenance by entering y in the Maintenance Tests field on
page 2 of the change trunk-group form.
1. Run status trunk grp#/mbr#.
2. Check the results of Test #255.
3. See the ''ATM-SGRP (ATM Signaling Group)''
1. Retry the command up to 5 times at 1-minute intervals.
1. Wait 2 minutes and try again.
1. Retry the command up to 5 times at 1-minute intervals.
1. See the ''ATM-SGRP (ATM Signaling Group)''
Signaling Link Port) maintenance objects.
1. Retry the command up to 5 times at 1-minute intervals.
1. Wait 4 minutes and check the Error Log for any new Error Type 3073.
If there are none, both sides of the ISDN connection agree on the
service state. The negotiation succeeded.
If there is a new 3073 error, the negotiation failed (the request timed
out).
maintenance object.
and ISDN-LNK (ISDN
Continued on next page
Issue 5 October 2002
735