Avaya DEFINITY Server CSI Maintenance Manual page 678

Maintenance Objects
System technician-demanded tests: descriptions
and error codes
Always investigate tests in the order presented in the table below when inspecting
errors in the system. By clearing error codes associated with the Battery Feed
Test, for example, you may also clear errors generated from other tests in the
testing sequence.
Order of Investigation
Battery Feed Test (#35)
Station Present Test (#48)
Looparound Test (#161)
Conference Test (#7)
NPE Crosstalk Test (#6)
Station Status and Translation Audits and
Updates Test (#36)
1. D = Destructive; ND = Nondestructive
NPE Crosstalk Test (#6)
This test verifies that the port's NPE channel talks on the selected time slot and
never crosses over to time slots reserved for other connections. If the NPE is not
working correctly, one-way and noisy connections may be observed. This test is
usually part of the long test sequence and takes about 20 to 30 seconds to
complete.
Table 50. TEST #6 NPE Crosstalk Test
Error Test
Code Result
ABORT
678
Issue 5 October 2002
Description/Recommendation
Necessary system resources could not be allocated to run this test.
1. Retry the command at 1-minute intervals no more than 5 times.
2. If the test continues to abort, escalate the problem.
Short Test Long Test
Sequence Sequence
X X
X X
X
X
X
X X
Continued on next page
1
D/ND
ND
ND
ND
ND
ND
ND
555-233-119