Manual backup servers for s8500 or s8700 series media servers—r2.0 or later (12 pages)
Summary of Contents for Avaya S8700 Series
Page 1
Quick Start for Hardware Installation Avaya S8700-Series Servers 555-245-703 Issue 8 January 2008 700436827...
Page 2
Avaya’s standard warranty language, as well as the information in this document was complete and information regarding support for this product, while accurate at the time of printing, Avaya Inc. can under warranty, is available through the following assume no liability for any errors. Changes and...
Process and Specifications 1 Verifying the Equipment 2 Installing the SNMP Module in the UPS 3 Installing the Optional Second Hard Drive 4 Installing the DAL2 Card 5 Installing the Hardware in the Rack 6 Connecting the Cables 7 Configuring the UPS and the Ethernet Switch 8 Connecting the Laptop 9 Connecting to the G650 Media Gateway 10 Troubleshooting...
Page 4
Sequence step High/Critical Customer reliability reliability network Nonswitched Filled-out Electronic System electrical outlet Pre-Installation administration Worksheet (EPW) 87qslgnd KLC 021605 Anti-static wrist Warning! ground strap Use 2 people required to lift equipment Quick Start for Hardware Installation: Avaya S8700-Series Servers...
Verifying the Equipment Product Compact flash Services documentation Modem (2) reader and laptop flashcard CAT5 CAT5 CAT5 CAT5 (4 - 68) (4 -68) Modem cable Laptop to Fiber IPSI control network cables Duplication server cable cable cable SNMP module and cable (2) Screws O ff IPSI adapter...
Page 6
Installing the SNMP Module in the UPS COMM PORT ISOLATED IOIOI ALARM PORT 87qs2a KLC 010605 UPS and Ethernet Switch Mounting Brackets LNK COL Tx Rx FDX Hspd LAG PoE ROUT SYS PWR 8720qs2b LAO 102005 Quick Start for Hardware Installation: Avaya S8700-Series Servers...
Page 7
Installing an optional second hard drive (S8730) Note: To use RAID, available on the S8730 Server only, install an optional second Note: hard drive. L Y P O I- P 8730qsxf LAO 083007 Issue 8 January 2008...
Page 8
Installing the DAL2 Card: Removing the Cover (S8720 Server shown) d i s M PA UI D 8720qsxa LAO 101206 Quick Start for Hardware Installation: Avaya S8700-Series Servers...
Page 9
Installing the DAL2 Card: Removing the PCI Riser Cage (S8720/S8710) 8720qsxb LAO 101206 Issue 8 January 2008...
Page 10
Installing the DAL2 Card: Removing the DAL1 Card (S8710/ S8720) Note: Communication Manager 5.0 requires removing the DAL1 card and Note: replacing it with the DAL2 card. 8710qsd1 LAO 083007 Quick Start for Hardware Installation: Avaya S8700-Series Servers...
Page 11
Installing the DAL2 Card: Inserting the DAL2 Card (S8720/S8710) 8720qsxc LAO 101206 Issue 8 January 2008...
Page 12
Installing the DAL2 Card: Replacing the PCI Riser Cage (S8720/S8710) 8720qsxd LAO 101206 Quick Start for Hardware Installation: Avaya S8700-Series Servers...
Page 13
Installing the DAL2 Card: Removing the PCI Riser Cage (S8730) 8730qsxb LAO 081307 Issue 8 January 2008...
Page 14
Installing the DAL2 Card: Inserting the DAL2 Card (S8730) 8730qsxc LAO 081607 Quick Start for Hardware Installation: Avaya S8700-Series Servers...
Page 15
Installing the DAL2 Card: Replacing the PCI Riser Cage (S8730) 8730qsxd LAO 101807 Issue 8 January 2008...
Page 16
Installing the DAL2 Card: Replacing the Cover (S8720 Server shown) d i s M PA UI D 8720qsxe LAO 101306 Quick Start for Hardware Installation: Avaya S8700-Series Servers...
Page 17
Installing the Hardware in the Rack: Attaching Rails to the Server (S8720 Server shown) d i s U ID U ID 87qs2c KLC 010605 Issue 8 January 2008...
Page 18
Installing the Hardware in the Rack: Attaching Rails to the Rack (S8730/S8720) 8720qs2f LAO 0927 Quick Start for Hardware Installation: Avaya S8700-Series Servers...
Page 19
Installing the Hardware in the Rack: Attaching Rails to the Rack (S8710) Note: For racks with screw holes, see instructions included with the rail kit. Note: 87qs2d KLC 010605 Issue 8 January 2008...
Page 20
Installing the Hardware in the Rack: Inserting the Server Rails into the Rack Rails (S8720 shown) 8720qs2h LAO 092805 Quick Start for Hardware Installation: Avaya S8700-Series Servers...
Page 21
Installing the Hardware in the Rack: Recommended Locations (S8720 shown) disc COMPACT disc COMPACT disc COMPACT disc COMPACT LNK COL Tx Rx FDX Hspd LAG PoE LNK COL Tx Rx FDX Hspd LAG PoE ROUT SYS PWR ROUT SYS PWR LNK COL Tx Rx FDX Hspd LAG PoE ROUT SYS PWR...
Page 22
LNK COL Tx Rx FDX Hspd LAG PoE X360STK ROUT SYS PWR CABLE TO UPPER UNIT BUPS INPUT CABLE TO LOWER UNIT 50-57V 8A max (If non-dedicated control network) 8730qs3c LAO 102907 Quick Start for Hardware Installation: Avaya S8700-Series Servers...
Page 23
Connecting the Cables: Duplex Reliability (software memory duplication, S8720) (If dedicated disc COMPACT 100 MGz 100 MGz 133 MGz VDCI disc COMPACT 100 MGz 100 MGz 133 MGz VDCI LNK COL Tx Rx FDX Hspd LAG PoE X360STK ROUT SYS PWR CABLE TO UPPER UNIT BUPS INPUT CABLE TO LOWER UNIT...
Page 24
LNK COL Tx Rx FDX Hspd LAG PoE X360STK ROUT SYS PWR CABLE TO UPPER UNIT BUPS INPUT CABLE TO LOWER UNIT 50-57V 8A max (If non-dedicated control network) 8730qs3b LAO 102907 Rear Front Quick Start for Hardware Installation: Avaya S8700-Series Servers...
Page 25
Connecting the Cables: Duplex Reliability (hardware memory duplication, S8720/S8710) (If dedicated control network) disc COMPACT 100 MGz 100 MGz 133 MGz VDCI disc COMPACT 100 MGz 100 MGz 133 MGz VDCI LNK COL Tx Rx FDX Hspd LAG PoE X360STK ROUT SYS PWR CABLE TO UPPER UNIT BUPS INPUT...
Page 26
LNK COL Tx Rx FDX Hspd LAG PoE X360STK ROUT SYS PWR CABLE TO UPPER UNIT BUPS INPUT CABLE TO LOWER UNIT 50-57V 8A max (If non-dedicated control network) Rear 8730qs3d LAO 102907 Front Quick Start for Hardware Installation: Avaya S8700-Series Servers...
Page 27
Connecting the Cables: High or Critical Reliability (hardware memory duplication, S8720/S8710) disc COMPACT 100 MGz 100 MGz 133 MGz VDCI disc COMPACT 100 MGz 100 MGz 133 MGz VDCI LNK COL Tx Rx FDX Hspd LAG PoE X360STK ROUT SYS PWR CABLE TO UPPER UNIT BUPS INPUT CABLE TO LOWER UNIT...
(S8720 shown) 100 MGz 100 MGz 133 MGz VDCI 100 MGz 100 MGz 133 MGz VDCI X360STK CABLE TO UPPER UNIT BUPS INPUT CABLE TO LOWER UNIT 50-57V 8A max 87qsc4a LAO 102907 Quick Start for Hardware Installation: Avaya S8700-Series Servers...
Page 31
Configuring the UPS and the Ethernet Switch* *If Avaya-supplied disc COMPACT 100 MGz 100 MGz 133 MGz VDCI disc COMPACT 100 MGz 100 MGz 133 MGz VDCI LNK COL Tx Rx FDX Hspd LAG PoE X360STK ROUT SYS PWR CABLE TO UPPER UNIT...
Page 32
Connecting the Laptop to Server 1 (S8720/S8710) 100 MGz 100 MGz 133 MGz VDCI 100 MGz 100 MGz 133 MGz VDCI X360STK CABLE TO UPPER UNIT BUPS INPUT CABLE TO LOWER UNIT 50-57V 8A max 87qsc5c LAO 102907 Quick Start for Hardware Installation: Avaya S8700-Series Servers...
Page 33
Connecting the Laptop to Server 2 (S8730) PCIe 2 PCIe 1 ILO 2 PCIe 2 PCIe 1 ILO 2 X360STK CABLE TO UPPER UNIT BUPS INPUT CABLE TO LOWER UNIT 50-57V 8A max 8730qs5d LAO 121107 Connecting the Laptop to Server 2 (S8720/S8710) 100 MGz 100 MGz 133 MGz...
Does the outlet have power? ● The alarm LEDs on the UPS are flashing Refer to the UPS user’s guide ● ● No power to the Avaya-supplied Ethernet switch Is the switch plugged into the UPS? ● ● Does the UPS have power? ●...
Page 36
Quick Start for Hardware Installation: Avaya S8700-Series Servers...
Need help?
Do you have a question about the S8700 Series and is the answer not in the manual?
Questions and answers