Table of Contents
Advertisement
JUNOSe 11.1.x Command Reference Guide N to Z
show ip pim interface
show ip pim interface { summary | [ interfaceType interfaceSpecifier ] [ count ]
Syntax
[ filter ] }
Command introduced before JUNOSe Release 7.1.0.
Release Information
Displays information about each PIM dense mode interface.
Description
Options
Privileged Exec, User Exec
Mode
838
show ip pim interface
summary Displays the number of configured, enabled, and disabled PIM dense
mode, PIM sparse mode, and PIM sparse-dense mode interfaces
interfaceType Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
count Displays the number of incoming and outgoing PIM control packets
filter See Filtering show Commands on page 4
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 and is the answer not in the manual?