Domain-Authentication-Key - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
domain-authentication-key
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
domain-authentication-key [ 0 | 8 ] authKey
no domain-authentication-key
Command introduced before JunosE Release 7.1.0.
Assigns a password for authentication of IS-IS level 2 LSPs, CSNPs, and PSNPs. The no
version deletes the password.
NOTE: Issuing this command enables simple authentication of level 2 LSPs only. To
enable authentication of level 2 CSNPs or PSNPs, use the domain-authentication
command.
0—indicates the authKey is entered in unencrypted form (plaintext); this is the default
option
8—indicates the authKey is entered in encrypted form (ciphertext)
authKey—password; string of up to 8 characters
Router Configuration
Chapter 5: D Commands
535
Advertisement
Table of Contents
