Domain-Authentication-Key - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

domain-authentication-key

domain-authentication-key [ 0 | 8 ] authKey
Syntax
no domain-authentication-key
Command introduced before JUNOSe Release 7.1.0.
Release Information
Assigns a password for authentication of IS-IS level 2 LSPs, CSNPs, and PSNPs. The
Description
no version deletes the password.
NOTE: Issuing this command enables simple authentication of level 2 LSPs only. To
enable authentication of level 2 CSNPs or PSNPs, use the domain-authentication
command.
Options
Router Configuration
Mode
0 indicates the authKey is entered in unencrypted form (plaintext); this is the
default option
8 indicates the authKey is entered in encrypted form (ciphertext)
authKey password; string of up to 8 characters
Chapter 5: D Commands
domain-authentication-key
537