Switch Logging Commands
swlog clear
Clears the files that store switch logging data.
swlog clear
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Use this command when the switch logging display is too long due to some of the data being old or out
of date.
•
This command can also be used on the secondary CMM.
Examples
-> swlog clear
Release History
Release 6.6.1; command was introduced.
Related Commands
swlog output
show log swlog
show swlog
MIB Objects
systemSwitchLoggingGroup
systemSwitchLoggingClear
OmniSwitch 6250 CLI Reference Guide
Enables or disables switch logging output to the console, file, or data
socket.
Displays stored switch logging information from flash.
Displays switch logging information.
November 2009
page 45-9