Swlog Clear - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Switch Logging Commands

swlog clear

Clears the files that store switch logging data.
swlog clear
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use this command when the switch logging display is too long due to some of the data being old or out
of date.
•
This command can also be used on the secondary CMM.
Examples
-> swlog clear
Release History
Release 7.1.1; command was introduced.
Related Commands
swlog output
show log swlog
show swlog
MIB Objects
systemSwitchLoggingGroup
systemSwitchLoggingClear
OmniSwitch CLI Reference Guide
Enables or disables switch logging output to the console, file, or data
socket.
Displays stored switch logging information from flash.
Displays switch logging information.
March 2011
swlog clear
page 35-9