GE Senographe DS Manual page 1455

GE Healthcare
Revision 1
9-2 Connect the new keyboard
1. Unplug and remove the X-ray Console.
2. Remove Control Station Top Cover. See
Covers on page 503.
3. Remove Control Station Omega Cover. See
Covers on page 503.
4. Disconnect the original keyboard from the back of the ADS Computer, and remove it from the Control
Station.
1 2
5
Reference
1
2
5
3, 4, 6
5. Put the new keyboard on the Control Station and connect it to the USB connector at back of the ADS
Computer (as illustrated above).
6. Reinstall the Omega Cover (see
page 503).
7. Reinstall the Top Cover (see
page 503).
8. Reinstall the X-ray Console.
JC-DR-A-315.fm
3
4
9
6
Function
Mouse or Trackball USB Link
Keyboard USB Link
Bar Code Reader USB Link
Not used
Job Card PHY A040 - Remove/Reinstall Control Station Covers on
Job Card PHY A040 - Remove/Reinstall Control Station Covers on
Service Information and Procedures Class A 2385072-16-8EN
Job Card D/R A315 - International Keyboard
Job Card PHY A040 - Remove/Reinstall Control Station
Job Card PHY A040 - Remove/Reinstall Control Station
Page no. 1455
Senographe DS
Chapter 9