Job Card D/R A290 - Fov Button - GE Senographe DS Manual

GE Healthcare
Revision 1

Job Card D/R A290 - FOV Button

1 SUPPLIES
FOV button
2 TOOLS
Standard Tool Box
3 REQUIRED EFFORT
Personnel: 1 Field Engineer
Time: 15 minutes
4 SAFETY PRECAUTIONS
WARNING
The Gantry must be powered off.
5 PREREQUISITES
None
6 PROCEDURE
6-1 Disassembly of the FOV Buttons
1. Switch off the Senographe electrical power.
2. Remove the tube head covers; refer to
page 523.
3. Disconnect the W510 cable from the J4 connector on the Tube Tilt board.
4. Remove the allen screws (1) on each side of the Tube Head (3 mm allen wrench).
1
JC-DR-A-290.fm
Service Information and Procedures Class A 2385072-16-8EN
Job Card PHY A044 - Remove/Reinstall Gantry Covers on
Page no. 1391
Senographe DS
Job Card D/R A290 - FOV Button
Chapter 9
1
Chapter 9