Honda Accord 2008 Manual page 1814

07/11/02 09:38:57 61TA0000_200_0247
Rear Bumper Finisher Cover Replacement
2-door
NOTE:
• Put on gloves to prevent damage.
• Take care not to scratch the rear bumper and the
body.
1. Remove the screw and the clips. Pull the rear
bumper finisher cover (A) forward to release the
hooks (B), then remove the cover from the rear
bumper (C).
NOTE: To remove the clips, pry the inner clip up at
the edge near the line (F) on its head.
＊０１
Fastener Locations
: Screw, 1
C
2. Install the cover in the reverse order of removal,
and note these items:
• If the clips are damaged or stress-whitened,
replace them with new ones.
• Push the clips into place securely.
ＴＡ０８ＡＢ２Ｊ１８５１３４４９６４０ＫＢＡＴ０２
: Clip, 2
F F
B
B
A
20-245