Honda Accord 2008 Manual page 1817

07/11/02 09:38:58 61TA0000_200_0250
Hood
Hood Seal and Hood Molding
Replacement (cont'd)
4-door - Except Canada models
＊０３
Fastener Locations
A
B
4-door - Canada models
＊０４
Fastener Locations
C
D
2. Install the seal or the molding in the reverse order
of removal, and note these items:
• If the clips are damaged or stress-whitened,
replace them with new ones.
• Push the clips into place securely.
20-248 20-248
: Clip, 9
A
B
: Clip, 7
C
D
Hood Insulator Replacement
For Some Models
1. Using a clip remover, detach the clips. Remove the
insulator (A) by pulling it away from the hooks (B).
Take care not to scratch the hood.
Fastener Locations
: Clip, 9
B
2. Install the insulator in the reverse order of removal,
and note these items:
• If the clips are damaged or stress-whitened,
replace them with new ones.
• Push the clips into place securely.
ＴＡ０８Ａ００Ｊ１８５３３２３１７０１ＫＢＡＴ００
A
＊０１