07/11/02 09:20:24 61TA0000_110_0424
EVAP System
DTC Troubleshooting (cont'd)
18. Disconnect the air tube (A) from the FTP sensor (B).
*02
A
19. Check the FTP SENSOR in the DATA LIST with the
HDS.
Is it between
0.2 in.Hg,
YES
tube or vent, then go to step 24.
−
NO
20. Turn the ignition switch to LOCK (0).
11-424
B
−
0.67 and 0.67 kPa (
−
5 and 5 mmHg), or 2.4 and 2.6 V ?
−
Check for a blockage in the FTP sensor air
Go to step 20.
21. Remove the FTP sensor (A) from the EVAP canister
with its connector connected (see page 11-430).
22. Turn the ignition switch to ON (II).
−
0.2 and
23. Check the FTP SENSOR in the DATA LIST with the
HDS.
Is it between
0.2 in.Hg,
−
YES
canister and the FTP sensor port, then go to
step 24.
NO
−
then go to step 24.
A
−
0.67 kPa and 0.67 kPa (
−
5 and 5 mmHg), or 2.4 and 2.6 V ?
Check for debris or clogging at the EVAP
Replace the FTP sensor (see page 11-430),
*03
−
0.2 and