Honda Accord 2008 Manual page 748

07/11/02 09:20:26 61TA0000_110_0429
8. Remove the EVAP canister (A) from the EVAP
canister bracket (B).
＊０３
9. Remove the EVAP canister vent shut valve (A) and
FTP sensor (B) from the canister (C).
＊０４
10. Reassemble the EVAP canister with new O-rings (D)
and a new retainer (E), then install the EVAP
canister bracket.
NOTE: Do not coat the O-rings with oil.
9.8 N·m
(1.0 kgf·m, 7.2 lbf·ft)
A
B
B
D
E
D
A
11. Install the EVAP canister assembly to the body.
NOTE: Attach the bracket arm (A) to the body as
shown.
A
12. Install the parts in the reverse order of removal.
Use new bolts when you install the rear subframe.
C
13. Check the wheel alignment (see page 18-5).
＊０５
11-429