Resource Pool Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
resource pool <pool name>
Use the resource pool command to associate a resource pool with the demand interface. No more than one
resource pool may be associated with an interface. Refer to resource pool-member <pool-name> [<cost>]
on page 693 for more information. Use the no form of this command to restore the default values.
Syntax Description
<pool name>
Default Values
By default, no resource pool is associated with this interface.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 11.1
Usage Examples
The following example associates the resource pool named Pool1 with demand interface 1:
(config)#interface demand 1
(config-demand 1)#resource pool Pool1
61200990L1-35E
Specifies the resource pool that this interface will use to originate/answer demand
connections.
Command was introduced.
Copyright © 2005 ADTRAN
Demand Interface Configuration Command Set
689