Command Reference Guide
encryption [aes-xxx-cbc | des | 3des]
Use the encryption command to specify which encryption algorithm this IKE policy will use to transmit
data over the IKE-generated SA.
Syntax Description
aes-128-cbc
aes-192-cbc
aes-256-cbc
des
3des
Default Values
By default, encryption is set to DES.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 Series units.
Command History
Release 4.1
Usage Examples
The following example selects 3DES as the encryption algorithm for this IKE policy:
(config-ike)#attribute 10
(config-ike-attribute)#encryption 3des
61200990L1-35E
Specifies the AES-128-CBC encryption algorithm.
Specifies the AES-192-CBC encryption algorithm.
Specifies the AES-256-CBC encryption algorithm.
Specifies the DES encryption algorithm.
Specifies the 3DES encryption algorithm.
Command was introduced.
Copyright © 2005 ADTRAN
IKE Policy Attributes Command Set
1069