As-Path-List Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
as-path-list <listname> [in | out]
Use the as-path-list command to assign a predefined autonomous system (AS) path list to a BGP neighbor.
This list is then used to filter inbound and/or outbound BGP route updates. Use the no form of this
command to discontinue use of the list.
Syntax Description
<listname>
in
out
Default Values
By default, no AS path lists are specified for filtering.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 9.3
Functional Notes
Before they can be assigned to a neighbor, AS path lists must first be defined using the ip as-path-list
command.
Usage Examples
The following example uses the no15 AS path list to filter all inbound BGP route updates:
(config)#router bgp-neighbor 192.22.73.101
(config-bgp-neighbor)#as-path-list no15 in
61200990L1-35E
Assigns an AS path list to this BGP neighbor.
Specifies the filtering of all inbound BGP route updates.
Specifies the filtering of all outbound BGP route updates.
Command was introduced.
Copyright © 2005 ADTRAN
BGP Neighbor Configuration Command Set
1098