Ip-Address (Ca Profile Configuration Command) - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
ip-address <address>
Use the ip-address command to specify an IP address to be included in the certificate requests.
Syntax Description
<address>
Default Values
No defaults necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1
Functional Notes
Configuring this setting simplifies the crypto ca enroll dialog, allowing you to enter the IP address only
once rather than every time you go through the enrollment process. Refer to
page 316.
Usage Examples
The following example specifies 66.203.52.193 as the IP address to be sent in certificate requests:
(ca-profile)#ip-address 66.203.52.193
61200990L1-35E
Defines the IP address in dotted decimal notation (e.g., 192.22.73.101).
Command was introduced.
Copyright © 2005 ADTRAN
CA Profile Configuration Command Set
crypto ca enroll <name> on
1035