Called-Number Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
called-number <DNIS number>
Use the called-number command to link calls to specific interfaces based on their dialed number
identification service (DNIS) numbers. Multiple called numbers may be specified for an interface. Use the
no form of this command to restore the default values.
Syntax Description
<DNIS number>
Default Values
By default no called numbers are defined.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 11.1
Usage Examples
The following example links calls with a DNIS number of 2565558409 to the demand interface 1:
(config)#interface demand 1
(config-demand 1)#called-number 2565558409
61200990L1-35E
Identifies the called number to be linked to an interface. The DNIS number is
limited to 20 digits.
Command was introduced.
Copyright © 2005 ADTRAN
Demand Interface Configuration Command Set
637