Ip Firewall Policy-Log Threshold Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
ip firewall policy-log threshold <value>
Use the ip firewall policy-log threshold command to specify the number of connections required by an
access control policy before the AOS will generate a log message. Use the no form of this command to
return to the default threshold.
The AOS security features must be enabled (using the ip firewall command) for the stateful
inspection firewall to be activated.
Syntax DescriptionSyntax Description
<value>
Default Values
By default, the ip firewall policy-log threshold is set to 100.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 2.1
Usage Examples
The following example specifies a threshold of 15 connections before generating a log message:
(config)#ip firewall policy-log threshold 15
61200990L1-35E
Specifies the number of access policy connections the AOS will identify before
generating a log message (valid range: 0 to 4,294,967,295).
Command was introduced.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
377