Fast-Idle Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
fast-idle <seconds>
Use the fast-idle command to set the amount of time the demand interface connection will remain active in
the absence of interesting traffic when there is contention for the demand resources being used by this
interface. Use the no form of this command to restore the default values.
Syntax Description
<seconds>
Default Values
By default, fast-idle is set to 120 seconds.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 11.1
Usage Examples
The following example sets fast idle to 1,073,752 seconds:
(config)#interface demand 1
(config-demand 1)#fast-idle 1073752
61200990L1-35E
Specifies the number of seconds the interface will remain up in the absence of
interesting traffic. Range is 1 to 2,147,483.
Command was introduced.
Copyright © 2005 ADTRAN
Demand Interface Configuration Command Set
651