Snmp-Server Chassis-Id Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
snmp-server chassis-id <id string>
Use the snmp-server chassis-id command to specify an identifier for the Simple Network Management
Protocol (SNMP) server. Use the no form of this command to return to the default value.
Syntax Description
<id string>
Default Values
By default, the snmp-server chassis-id is set to Chassis ID.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1
Usage Examples
The following example configures a chassis ID of A432692:
(config)#snmp-server chassis-id A432692
61200990L1-35E
Identifies the product using an alphanumeric string (up to 32 characters in length).
Command was introduced.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
446