Dial-Backup Priority (Tunnel Configuration Command) - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
dial-backup priority <value>
Use the dial-backup priority command to select the backup priority for this interface. This allows the user
to establish the highest priority backup link and ensure that link will override backups attempted by lower
priority links. Use the no form of this command to return to the default value. For more detailed
information on PPP dial-backup functionality, refer to the Functional Notes and Technology Review
sections of the command dial-backup call-mode [answer | answer-always | originate | originate-answer |
originate-answer-always]
Syntax Description
<value>
Default Values
By default, dial-backup priority is set to 50.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 1.1
Release 5.1
Usage Examples
The following example assigns the highest priority to this endpoint:
(config)#interface ppp 1
(config-ppp 1)#dial-backup priority 100
61200990L1-35E
on page 977.
Sets the relative priority of this link (valid range: 0 to 100). A value of 100
designates the highest priority.
Command was introduced.
Command was expanded to include the PPP interface.
Copyright © 2005 ADTRAN
Tunnel Configuration Command Set
984