Netbios-Name-Server (Dhcp Pool Command) - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
netbios-name-server <address> <secondary>
Use the netbios-name-server command to specify the primary and secondary NetBIOS Windows Internet
Naming Service (WINS) name servers available for use by the Dynamic Host Configuration Protocol
(DHCP) clients. Use the no form of this command to remove a configured NetBIOS name server.
Syntax Description
<address>
<secondary>
Default Values
By default, there are no configured NetBIOS WINS name servers.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 2.1
Usage Examples
The following example specifies a primary NetBIOS WINS name server with an IP address of 172.45.6.99
and a secondary with an IP address of 172.45.8.15:
(config)#ip dhcp-server pool MyPool
(config-dhcp)#netbios-name-server 172.45.6.99 172.45.8.15
61200990L1-35E
Specifies the address (in dotted decimal notation) of the preferred NetBIOS WINS
name server on the network (example: 192.72.4.254).
Optional. Specifies the address (in dotted decimal notation) of the second
preferred NetBIOS WINS name server on the network (example: 192.100.4.253).
Command was introduced.
Copyright © 2005 ADTRAN
DHCP Pool Command Set
1156