Snmp-Server View Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
snmp-server view <viewname> <oidtree> [excluded | included]
Use the snmp-server view command to create or modify a Simple Network Management Protocol
(SNMP) view entry. Use the no form of this command to remove an entry.
Syntax Description
<viewname>
<oidtree>
excluded
included
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 9.1
Usage Examples
The snmp-server view command can include or exclude a group of OIDs. The following example shows
how to create a view (named blockInterfaces) to exclude the OID subtree family 1.3.3.1.2.1.2:
(config)#snmp-server view blockInterfaces 1.3.6.1.2.1.2.* excluded
The following example shows how to create a view (named block) to include a specific OID:
(config)#snmp-server view block 1.3.6.1.2.1.2. included
61200990L1-35E
Specifies a label for the view record being created. The name is a record
reference.
Specifies the object identifier (oid) to include or exclude from the view. To identify
the subtree, specify a string using numbers, such as 1.4.2.6.8. Replace a single
subidentifier with the asterisk (*) to specify a subtree family.
Specifies an excluded view.
Specifies an included view.
Command was introduced.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
455