Command Reference Guide
show ip ospf interface <interface>
Use the show ip ospf interface command to display open shortest path first (OSPF) information for a
specific interface.
Syntax Description
<interface>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 3.1
Release 9.1
Usage Examples
The following example shows OSPF information for the PPP 1 interface.
>enable
#show ip ospf interface ppp 1
61200990L1-35E
Optional. Displays the interface type. Type show ip ospf interface ? for a complete
list of applicable interfaces.
Command was introduced.
Command was expanded to include HDLC and tunnel interfaces.
Copyright © 2005 ADTRAN
Enable Mode Command Set
214