Set As-Path Prepend Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
set as-path prepend [<number> | last-as <number>]
Use the set as-path prepend command to prepend a number to the AS path to influence the best-path
selection process by making the AS path appear further away. Use the no form of this command to disable
this feature.
Syntax Description
as-path prepend <number>
as-path prepend last-as <number>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 Series and
Total Access 900 Series units.
Command History
Release 10.1
Usage Examples
The following example prepends the number 2 to the last AS path number:
(config)#route-map MyMap permit 100
(config-route-map)#set as-path prepend last-as 2
61200990L1-35E
Specifies a number to be prepended to the AS path value as an
autonomous number. (Valid range: 1 to 65,535.)
Specifies a number to be prepended to the last AS path number.
(Valid range: 1 to 10.)
Command was introduced.
Copyright © 2005 ADTRAN
Route Map Command Set
1180