List Of Tcp Port Numbers That May Be Identified Using The Textname - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
<destination ip>
<destination port>
<icmp-type>
61200990L1-35E
The following is the list of TCP port numbers that may be identified using the text
name (in bold):
bgp (Port 179)
chargen (Port 19)
cmd (Port 514)
daytime (Port 13)
discard (Port 9)
domain (Port 53)
echo (Port 7)
exec (Port 512)
finger (Port 79)
ftp (Port 21)
gopher (Port 70)
hostname (Port 101)
ident (Port 113)
irc (Port 194)
klogin (Port 543)
kshell (Port 544)
login (Port 513)
Specifies the destination IP address used for packet matching.
IP addresses can be expressed in one of three ways:
1. Using the keyword any to match any IP address. For example, entering deny
any will effectively shut down the interface that uses the access list because all
traffic will match the any keyword.
2. Using the host <A.B.C.D> to specify a single host address. For example,
entering permit host 196.173.22.253 will allow all traffic from the host with an
IP address of 196.173.22.253.
3. Using the <A.B.C.D> <wildcard> format to match all IP addresses in a "range."
Wildcard masks work in reverse logic from subnet mask. Specifying a one in
the wildcard mask equates to a "don't care." For example, entering permit
192.168.0.0 0.0.0.255 will permit all traffic from the 192.168.0.0/24 network.
Optional. Specifies the destination port. Only valid when <protocol> is tcp or udp
(Refer to previously listed <source port> for more details).
Optional. Filters packets using ICMP defined (and numbered) messages carried
in IP datagrams (used to send error and control information). Valid range is
0 to 255.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
lpd (Port 515)
nntp (Port 119)
pim-auto-rp (Port 496)
pop2 (Port 109)
pop3 (Port 110)
smtp (Port 25)
sunrpc (Port 111)
syslog (Port 514)
tacacs (Port 49)
talk (Port 517)
tftp (Port 69)
telnet (Port 23)
time (Port 37)
uucp (Port 540)
whois (Port 43)
www (Port 80)
346