Logging Facility Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
logging facility <facility type>
Use the logging facility command to specify a syslog facility type for the syslog server. Error messages
meeting specified criteria are sent to the syslog server. For this service to be active, you must enable log
forwarding. Refer to logging forwarding on
described under Functional Notes below. Use the no form of this command to return it to its default
setting.
Syntax Description
<facility type>
Default Values
The default value is local7.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 3.1
Functional Notes
The following is a list of all the valid facility types:
auth
cron
daemon
kern
local0 - local7
lpr
mail
news
sys9 - sys14
syslog
user
uucp
61200990L1-35E
on page 427
Specifies the syslog facility type (refer to Functional Notes below).
Command was introduced.
Authorization system
Cron facility
System daemon
Kernel
Reserved for locally-defined messages
Line printer system
Mail system
USENET news
System use
System log
User process
UNIX-to-UNIX copy system
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
for related information. Facility types are
425