Qos-Policy Out - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
qos-policy out <mapname>
Use the qos-policy out command to apply a previously-configured QoS map to an interface. Use the no
form of this command to remove the map from the interface. The keyword out specifies that this policy
will be applied to outgoing packets.
Syntax Description
<mapname>
Default Values
No default value is necessary for this command.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 6.1
Release 11.1
Usage Examples
The following example applies the QoS map VOICEMAP to the demand 1 interface:
(config)#interface demand 1
(config-demand 1)#qos-policy out VOICEMAP
61200990L1-35E
Specifies the name of a previously-created QoS map (refer to
<mapname> <sequence number>
Command was introduced.
Command expanded to include the demand interface.
Copyright © 2005 ADTRAN
Demand Interface Configuration Command Set
on page 434
for more information).
qos map
688