Ip Routing Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide Global Configuration Mode Command Set
ip routing
Use the ip routing command to enable the AOS IP routing functionality. Use the no form of this command
to disable IP routing.
Syntax Description
No subcommands.
Default Values
By default, IP routing is enabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following example enables the AOS IP routing functionality:
(config)#ip routing
61200990L1-35E Copyright © 2005 ADTRAN 402