Netbios-Name-Server Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
netbios-name-server <address1> <address2>
Use the netbios-name-server command to specify the NetBIOS Windows Internet Naming Service
(WINS) name servers to assign to a client.
Syntax Description
<address1>
<address2>
Default Values
By default, no WINs server address is defined.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 4.1
Usage Examples
The following example defines two WINs server addresses for this configuration pool:
(config)#crypto ike client configuration pool ConfigPool1
(config-ike-client-pool)#netbios-name-server 172.1.17.1 172.1.17.25
61200990L1-35E
Specifies the first WINs server address to assign.
Specifies the second WINs server address to assign.
Command was introduced.
Copyright © 2005 ADTRAN
IKE Client Command Set
1066