Aaa Group Server Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
aaa group server [radius | tacacs+] <listname>
Use the aaa group server command to group pre-defined RADIUS and TACACS+ servers into named
lists. For more detailed information on AAA functionality, refer to the Technology Review section of the
command aaa on on page
Syntax Description
radius
tacacs+
<listname>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 5.1
Release 11.1
Functional Notes
Use the radius-server command to specify RADIUS servers before adding them to a group. Likewise, use
the tacacs-server command to specify TACACS+ servers before adding them to a group. These
commands enter a mode for adding individual servers to the named group. Refer to
Command Set on page 1169
information.
The default group cannot be changed and includes all RADIUS servers in the order they were specified by
the radius-server commands. The same is true of TACACS+ servers specified by the tacacs-server
commands.
61200990L1-35E
296.
Groups defined RADIUS servers.
Groups TACACS+ server.
Specifies the name of the list.
Command was introduced.
TACACS+ server support was added.
TACACS+ Group Configuration Command Set
or
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
Radius Group
on page 1191
for more
294