Timers Spf Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
timers spf <delay> <hold>
Use the timers spf command to configure the shortest path first (SPF) calculation and hold intervals.
Syntax Description
<delay>
<hold>
Default Values
<delay>
<hold>
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 3.1
Usage Examples
The following example defines a delay of 10 seconds and a hold-time of 30 seconds:
(config)#router ospf
(config-ospf)#timers spf 10 30
61200990L1-35E
Specifies the time in seconds between OSPF's receipt of topology changes and
the beginning of SPF calculations.
Specifies the time in seconds between consecutive SPF calculations.
Range: 10 to 1800 seconds.
5 seconds
10 seconds
Command was introduced.
Copyright © 2005 ADTRAN
Router (OSPF) Configuration Command Set
1128