Subject-Name (Ca Profile Configuration Command) - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
subject-name <name>
Use the subject-name command to specify the subject name used in the certificate request.
Syntax Description
<name>
Default Values
By default, there is no subject name configured.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1
Functional Notes
Configuring this setting simplifies the crypto ca enroll dialog, allowing you to enter the subject name only
once rather than every time you go through the enrollment process. Refer to
page 316.
Usage Examples
The following example assigns a subject name of Adtran-cert to certificate requests:
(ca-profile)#subject-name Adtran-cert
61200990L1-35E
Specifies a subject name string using up to 256 characters entered in X.500 LDAP
format.
Command was introduced.
Copyright © 2005 ADTRAN
CA Profile Configuration Command Set
crypto ca enroll <name> on
1038