Ip Domain-Proxy Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide Global Configuration Mode Command Set
ip domain-proxy
Use the ip domain-proxy command to enable DNS proxy for the router. This enables the router to act as a
proxy for other units on the network.
Syntax Description
No subcommands.
Default Values
By default, this command is disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 3.1 Command was introduced.
Functional Notes
When this command is enabled, incoming DNS requests will be handled by the router. It will first search its
host table for the query, and if it is not found there the request will be forwarded to the servers configured
with the ip name-server command.
Usage Examples
The following example enables DNS proxy:
(config)#ip domain-proxy
61200990L1-35E Copyright © 2005 ADTRAN 364