Ppp Chap Password (Ppp Interface Configuration Command) - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
ppp chap password <password>
Use the ppp chap password command to configure an alternate password when the peer requires CHAP
PPP authentication. Use the no form of this command to remove a configured password. For more
information on PAP and CHAP functionality, refer to the Technology Review section for the command ppp
authentication [chap | pap]
Syntax Description
<password>
Default Values
By default, there is no defined PPP CHAP password.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 1.1
Usage Examples
The following example specifies a PPP CHAP password of my_password:
(config)#interface ppp 1
(config-ppp 1)#ppp chap password my_password
61200990L1-35E
on page 952.
Specifies a password using an alphanumeric string up to 80 characters in length.
Command was introduced.
Copyright © 2005 ADTRAN
PPP Interface Configuration Command Set
958