Server Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
server [acct-port <port number>| auth-port <port number>]
Use the server command to add a predefined RADIUS server to the current named list of servers. See
radius-server on page 436
Syntax Description
acct-port <port number>
auth-port <port number>
Default Values
No defaults necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and Total Access
900 Series units.
Command History
Release 5.1
Usage Examples
The following example adds a server to the myServers list:
(config)#aaa group server radius myServers
(config-sg-radius)#server 1.2.3.4 acct-port 786 auth-port 1812
(config-sg-radius)#server 4.3.2.1
(config-sg-radius)#exit
(config)#
or
(config)#aaa group server radius myServers
(config-sg-radius)#server 4.3.2.1
(config-sg-radius)#exit
(config)#
61200990L1-35E
for more information.
Defines the accounting port value.
Defines the authorization port value.
Command was introduced.
Copyright © 2005 ADTRAN
Radius Group Command Set
1170